Cell testing equipment
HB5V30-128TEST
Energy-Regenerative Cell Grading Equipment
The HOBAG Energy-Regenerative Cell Grading Equipment HB5V30-128TEST is suitable for cell charge-discharge testing, grading and aging testing in cell factories, traders and PACK manufacturers. Its 128-channel high-capacity design meets the testing needs of large-scale, mass-production lines, providing solutions and data support for the quality consistency of outgoing batteries. It is widely applied to cell testing in new energy vehicles, energy storage, consumer electronics and other fields.
Applications
Test performance across charge, discharge and SOC ranges.
Charge/discharge testing & QC standards for battery and PACK makers.
Battery recycling & repair: used battery testing and fault diagnosis.
Test prototypes of various specs (capacity, size) to validate design parameters.
TEST CAPABILITIES
Charge/Discharge Curve Test
DC Internal Resistance Test
Built-in, for reference
Charge Retention Test
Charge/Discharge Efficiency Test
Deep/Constant-Voltage Discharge Test
Overcharge/Overdischarge Tolerance Test
PRODUCT FEATURES
01
High-Efficiency Energy Feedback
DSP-based high-speed MCU digital power supply; up to 96% charge / 94% discharge efficiency with low heat output, cutting energy use and cost.
02
High-Precision Output
Imported alloy current sensing and 24-bit ADC; accuracy better than 0.05% with long-term stability.
03
Contactless High-Current Electronic Switching
Spark-free switching to avoid dust flashover hazards.
04
Independent Per-Channel Control
Each channel runs independently with its own charge/discharge settings for flexible cell testing.
05
Multiple Safety Protections
Reverse connection, power-loss resume, overcurrent/over/under-voltage, over-temperature and poor contact protection - full software & hardware safeguards.
06
Smart PC Software
Custom step programming, multi-level loops, curve analysis and Excel export; centralized monitoring of 1000+ channels.
07
Multi-Cell-Type Compatibility
Detachable quick-connect alligator clip harness (optional) for pouch and bolted prismatic cells; detachable fixture for cylindrical cells.
TECHNICAL DATA
Parameter | Value |
Model | HB5V30-TEST |
Main Channels | channels/cabinet |
Channel Mode | Fully independent |
Charge Voltage Range | 0V-5V |
Discharge Voltage Range | 1V-5V |
Voltage Accuracy | 字 |
Voltage Resolution | 1mV |
Max Output Current | ±30A |
Min Output Current | ±150mA |
Current Accuracy | 字 |
Current Resolution | 1mA |
Current Response Time | ≤20ms |
Output Power per Channel | 持续运行最大功率W |
Charge/Discharge Efficiency | 充电最高96% / 放电最高 |
Grid Harmonic / Power Factor | ≤3% / ≥0.99 |
Data Logging Interval | ≥1000m/次 |
Cycles / Nested Loops | 最大9999次 最大层 |
Communication | RJ-45 Ethernet |
Cooling | Forced air cooling |
Safety Standard | 符合EN60950、要求 |
Protection Rating | IP22 |
Need product selection or a customized testing solution?
Obtain product information and solutions







