Cell testing equipment
HB5V30-64TEST
Energy-Regenerative Cell Grading Equipment
The Energy-Regenerative Cell Grading Equipment is a new-generation regenerative high-precision testing system independently developed by HOBAG, built on high-efficiency energy regenerative technology and DSP digital power control technology. Specially designed for cells used in new energy vehicles, energy storage and other fields, it meets core testing needs — charge-discharge testing, formation, grading, cycling and overcharge/overdischarge tolerance testing — for cell factories, traders and PACK manufacturers, providing reliable assurance and data support for the quality consistency of outgoing cells.
Applications
Test performance across charge, discharge and SOC ranges.
Charge/discharge testing & QC standards for battery and PACK makers.
Battery recycling & repair: used battery testing and fault diagnosis.
Test prototypes of various specs (capacity, size) to validate design parameters.
TEST CAPABILITIES
Charge/Discharge Curve Test
DC Internal Resistance Test
Built-in, for reference
Charge Retention Test
Charge/Discharge Efficiency Test
Deep/Constant-Voltage Discharge Test
Overcharge/Overdischarge Tolerance Test
PRODUCT FEATURES
01
High-Efficiency Energy Feedback
DSP-based high-speed MCU digital power supply; up to 96% charge / 94% discharge efficiency with low heat output, cutting energy use and cost.
02
High-Precision Output
Imported alloy current sensing and 24-bit ADC; accuracy better than 0.05% with long-term stability.
03
Contactless High-Current Electronic Switching
Spark-free switching to avoid dust flashover hazards.
04
Independent Per-Channel Control
Each channel runs independently with its own charge/discharge settings for flexible cell testing.
05
Multiple Safety Protections
Reverse connection, power-loss resume, overcurrent/over/under-voltage, over-temperature and poor contact protection - full software & hardware safeguards.
06
Smart PC Software
Custom step programming, multi-level loops, curve analysis and Excel export; centralized monitoring of 1000+ channels.
07
Multi-Cell-Type Compatibility
Detachable quick-connect alligator clip harness (optional) for pouch and bolted prismatic cells; detachable fixture for cylindrical cells.
TECHNICAL DATA
Parameter | Value |
Model | HB5V30-64TEST |
Main Channels | 64 channels/cabinet |
Channel Mode | Fully independent |
Charge Voltage Range | 0V-5V |
Discharge Voltage Range | 1V-5V |
Voltage Accuracy | ±0.05%FS+5 digits |
Voltage Resolution | 1mV |
Max Output Current | ±30A |
Min Output Current | ±150mA |
Current Accuracy | ±0.05%FS+20 digits |
Current Resolution | 1mA |
Current Response Time | ≤20ms |
Output Power per Channel | Max 150W continuous |
Charge/Discharge Efficiency | Up to 96% charge / 94% discharge |
Grid Harmonic / Power Factor | ≤3% / ≥0.99 |
Data Logging Interval | ≥1000ms/sample |
Cycles / Nested Loops | Max 9999 cycles / 10 levels |
Communication | RJ-45 Ethernet |
Cooling | Forced air cooling |
Safety Standard | Meets EN60950, GB4943 |
Protection Rating | IP22 |
Need product selection or a customized testing solution?
Obtain product information and solutions







